Catalog NewsArticlesDealersDeliveryServiceJobPartnershipContacts Download
the catalog
Contacts info
Sales department
Export sales department
664040, Irkutsk, post office box 129, st. Rosa Luxemburg, no. 184
Enerpred

Double-sided cargo jack

Key characteristics:
Serie: DG... Г... PPDU...
Load capacity*, tons (kN: 500 tons
Pressure: 70 MPa
Stem return: Hydraulic
Types of supports: Two floating supports
Models
Development according to your specifications
Drawing
Important information

The content of this publication is subject to copyright of JSC TD ENERPRED and cannot be reproduced (even in part) without appropriate permission. JSC TD "ENERPRED" reserves the right to make any changes to the design and characteristics of the tool offered in this catalog without prior notice. Instrument specifications, including weight, dimensions and other parameters, may vary slightly.

Model Capacity
Class
tonnage
Strokemm Permissible
deviation
of
the
axis
of
floating
supports
relative
to
the
axis
of
the
jack
mm
Piston
cavity
volume
(working),
cm3
см3
Rod
cavity
volume,
cm3
см3
Overall
dimensions,
BxLxH
mm
Weight,
kg
kg
DG500G250PPDU2GZ 500 250 ±5º 17 672 5 886 457×604×679 450
Capacity
Class
tonnage
Strokemm Permissible
deviation
of
the
axis
of
floating
supports
relative
to
the
axis
of
the
jack
mm
Piston
cavity
volume
(working),
cm3
см3
500 250 ±5º 17 672
Rod
cavity
volume,
cm3
см3
Overall
dimensions,
BxLxH
mm
Weight,
kg
kg
5 886 457×604×679 450
Model DG500G250PPDU2GZ Capacity
Class
tonnage
500 Strokemm 250 Permissible
deviation
of
the
axis
of
floating
supports
relative
to
the
axis
of
the
jack
mm
±5º Piston
cavity
volume
(working),
cm3
см3
17 672 Rod
cavity
volume,
cm3
см3
5 886 Overall
dimensions,
BxLxH
mm
457×604×679 Weight,
kg
kg
450

This model of jacks is designed for lifting, moving, fixing cargo and is a means of mechanization when performing installation, dismantling, repair work in various industries and for lifting bridge spans.

-The high load capacity of 500 tons allows you to perform special tasks of a high level of complexity.

-High-strength support made of hardened steel prevents the stem from damage.

-The grooved surface of the support prevents the load from sliding.

-The hydraulic return of the rod allows you to quickly prepare the jack for the next cycle.

-The stem sleeve prevents the stem from exiting over the permissible length and is able to withstand the full load of the jack.

-Built-in safety valve protects the stem cavity from overloads.

-Installation the hydraulic lock is attached to the jack body to fix the piston in a given position and hold the load with the jack.

- In contrast to the installation of standard supports, to reduce the radial load on the rod and to compensate for the effect of the skew of the jack axis of the lifted load, an upper floating support is installed on the piston, and a lower floating support is installed on the lower part of the body.

- To fix the lower floating support during transportation and installation of the jack, there are semi-rings fastened together with screws.

Specify the appropriate parameters
Comment to the order
Сontact details

This model of jacks is designed for lifting, moving, fixing cargo and is a means of mechanization when performing installation, dismantling, repair work in various industries and for lifting bridge spans.

-The high load capacity of 500 tons allows you to perform special tasks of a high level of complexity.

-High-strength support made of hardened steel prevents the stem from damage.

-The grooved surface of the support prevents the load from sliding.

-The hydraulic return of the rod allows you to quickly prepare the jack for the next cycle.

-The stem sleeve prevents the stem from exiting over the permissible length and is able to withstand the full load of the jack.

-Built-in safety valve protects the stem cavity from overloads.

-Installation the hydraulic lock is attached to the jack body to fix the piston in a given position and hold the load with the jack.

- In contrast to the installation of standard supports, to reduce the radial load on the rod and to compensate for the effect of the skew of the jack axis of the lifted load, an upper floating support is installed on the piston, and a lower floating support is installed on the lower part of the body.

- To fix the lower floating support during transportation and installation of the jack, there are semi-rings fastened together with screws.

We successfully cooperate

We have much to be proud of, because of our
partners leading companies in Russia and Eastern Europe:

Pay attention

Order a call

Our contacts

Irkutsk

Address

Rosa Luxemburg street, 184,post office box 129
Irkutsk, 664040, Russia

Phone

+7 (3952) 211-140

Fax

+7 (3952) 555-159

Email for orders

zakaz@enerpred.com

Email

info@enerpred.com

Contact with manager

Select your region

priceRequest